If your Xbox is having a hard time reading disks, skipping, or taking a long time to load, it is probably
time to replace your laser lens with a new one. This Samsung Laser Lens will do the trick
Main feature
1. Brand new, comes straight from the factory
2. Replacement laser lens for Xbox Model SOH-D12
3. Save on costly third party repairs and spend your money on new games instead!
4. No more frustrating wait while your games load; Less loading time = more playing time
5. Don’t miss crucial scenes and dialogue when watching DVDs – no more annoying jumping and skipping
6. A guide for installing the lens can be provided to buyers upon request
Package Content :
1 X Xbox SOH-D12laser lens
Compatible with:
Xbox Model SOH-D12
Product Reviews: There are currently no product reviews.
What is typical laser lens life and other lens related ?
Question: I am running 2 Mazak sheet lasers. 1 2.5kW and 1 2.0kW. Both machines are the STX510 S/C. We are using II-VI ZnSe Plano Convex lenses, 5" focal length. We run both machines around the clock 7 days a week. We cut mainly 16 gauge mild steel. Occasionally aluminum and S.S. We noticed that the lifespan of the laser lenses in our laser tube cutters is far longer than the lenses in our sheet cutters.
1)How often should we be cleaning the lens?
2)What is the average lifespan of a sheet laser lens?
3)Where can you get laser lenses refurbished?
4)Do refurbished lenses last as long as brand new?
5)Are there benefits to running a Positive meniscus lens instead of Plano Convex?
Answer: The lenses in a flatcutter see more action than a tubecutting machine first and foremost. Most OEM recommend cleaning the lens once at least every 8 hours.
5" Focus Lenses usually get hit quicker with spatter because they are closer to the nozzle and if piercing parameters are too aggressive or not optimized this will create a lot of spatter and eventually hit the lens. There is no way to predict how many hours it will last (I used to tell customer it could last you as little as 2 minutes (reflection) or as much as 1000 hours (mainly cutting thin steel). Reflection from aluminum (yes, I don't care what anybody says, aluminum reflects and can kill your lens), copper (mirrors are made of copper), not cutting through stainless (welding on top of the material).
1. Once every 8 hour shift would be the least
2. Depends on what you are cutting and also the mode of the resonator (prefocusing will destroy lenses as well)
3. Laser Research Optics
4. Not really but they are cheaper
5. The meniscus lens will probably give you a bit more speed on thin materials (small waist) but the plano convex will probably be better on thicker materials (longer waist) and they are cheaper since they don't have to be ground as a meniscus. Also, the OEM's usually design their system with one lens in mind, so you may check with Mazak first and see if they have experienced with this type of lens.